The four sides of a printed circuit board (PCB) enclosure consist of two pieces selected from a population whose mean length is

Answer:

Step-by-step explanation:

Characteristics of a bar graph include:

1). There must be uniform spacing between the bars or columns.

2). Each bar or column should have a consistent width.

3). All bars must share the same baseline.

4). The height of each bar corresponds to the data value.

Based on these criteria,

- Spacing between London-Paris and Rome-Oslo isn’t uniform.

- Width of the Munich bar differs from the others.

To start, we will shift the non-repeating segment of the decimal to the left side by dividing by a power of 10.

Then we will assign a variable to represent the value and also shift the repeating segment to the left.

Essentially, the concept here is that we can denote the repeating portion with a variable, let's say "x", and move forward with the calculation;





you can verify that using your calculator.

The answer is 10 apples.

These occurrences are unlikely to take place!

I hope this is helpful

A slope of 5/2 signifies that moving 2 units horizontally results in moving 5 units vertically. To visualize this, from any point on the line, shift 2 units right, and from there, move upwards until you intersect the line again. If the vertical movement is 5 units, the slope is confirmed to be 5/2. Option A indicates a slope of 5/2, B specifies a slope of 4/2, while C affirms the slope of 5/2. I can't clearly see the graphs represented in images D and E; however, E might have a slope of 5/2, which should be measured, and D clearly does not match the slope of 5/2, as it can be compared with A, demonstrating a significant difference, thus it can be eliminated.