A machine part will be cycled at ±350 MPa for 5 (103) cycles. Then the loading will be changed to ±260 MPa for 5 (104) cycles. F

Answer:

90 L.atm

Explanation:

According to the provided details:

First pathway:

A( 3 atm, 20 L) → C ( 1 atm, 20 L) → D (1 atm, 50 L)

Second pathway:

A(3 atm, 20 L) → B( 3 atm, 50 L) → D ( 1 atm, 50 L)

As the number of moles is 1.00 moles

To calculate wAB;

A → B signifies the transformation is happening at a steady pressure;

Thus,

wAB = pressure multiplied by the change in volume

wAB = P(V₂ - V₁)

wAB = 3 atm (50 L - 20 L)

wAB = 3 atm (30 L)

wAB = 90 L.atm

Answer:

?pooooooooooooooooooooooop

Explanation:

?pooooooooooooooooooooooop

Answer:

Temperature T = 394.38 K

Explanation:

The full solution and detailed explanation regarding the above question and its specified conditions can be found below in the accompanying document. I trust my explanation will assist you in grasping this particular topic.

Answer:Ensure the correct cable is connected between the laptop and the projector. Check for HDMI inputs or 15-pin video output interfaces.

Also, make sure the laptop is set to project to the correct display output.

Explanation:

Answer:

Total bandwidth: 8 kHz

Explanation:

Data provided:

Transmitter frequency: 3.9 MHz

Modulation up to: 4 kHz

Solution:

For the upper side frequencies:

Upper side frequencies = 3.9 × + 4 × 10³

Upper side frequencies = 3.904 MHz

For the lower side frequencies:

Lower side frequencies = 3.9 × - 4 × 10³

Lower side frequencies = 3.896 MHz

Consequently, the total bandwidth is computed as:

Total bandwidth = upper side frequencies - lower side frequencies

Total bandwidth = 8 kHz