Answer:
Indeed, the chemist is capable of identifying the compound present in the sample.
Explanation:
In one mole of K₂O, potassium has a mass of 2 × 39.1 g = 78.2 g, while the total mass of K₂O is 94.2 g. The mass ratio of K compared to K₂O is calculated as 78.2 g / 94.2 g = 0.830.
For 1 mole of K₂O₂, potassium's mass remains the same at 78.2 g, but the total mass of K₂O₂ is 110.2 g. The mass ratio of K to K₂O₂ then equates to 78.2 g / 110.2 g = 0.710.
When the chemist measures the mass of K in relation to the overall sample, the mass ratio can be computed.
- If the mass ratio is 0.830, then it indicates a pure K₂O compound.
- If the mass ratio is 0.710, it indicates a pure K₂O₂ compound.
- If the mass ratio falls outside of 0.830 or 0.710, the sample is assessed to be a mixture.
Response:
2200 mg of antibiotic
Explanation:
The prescribed antibiotic dosage is 40 mg/kg of body weight.
For a patient weighing 55 kg, we calculate the dose of antibiotic as follows:
If we analyze 40/1000000, we can determine antibiotic allocation in kg per kg of weight
= 0.00004 kg of antibiotic for each kilogram
0.00004 multiplied by 55 (to find out the required amount for a 55 kg individual)
= 0.0022 kg
This 0.0022 figure converts to milligrams as follows
0.0022*10^6
= 2200 mg of antibiotic is indicated for a patient weighing 55 kg.
Response: Water molecules migrate from the dilute to the concentrated solution
Clarification:
During osmosis, when a solution is separated by a semipermeable membrane, the solvent (commonly water) moves from the less concentrated solution, regarding solute content, through the semipermeable membrane towards the solution with a higher concentration to balance the concentration levels between the two solutions.
Thus, in this scenario, water molecules flow from the 0.4M sugar solution to the 0.7M sugar solution through the semipermeable membrane.
Answer: 25,200.
Explanation:
1) Starting with: 4.659 × 10⁴ - 2.14 × 10⁴
2) Significant figures need to be considered.
Because the powers are equal (10⁴), the decimal values can be subtracted directly. However, it is essential to first check significant figures and the count of decimal places.
3) The figure 4.659 × 10⁴ has four significant digits (4, 6, 5, and 9), whereas 2.14 × 10⁴ contains three significant digits (2, 1, and 4).
4) When adding or subtracting values with a different number of decimal places, the answer must reflect the same number of decimal places as the number with the least amount of decimal precision.
5) Prior to performing subtraction, it is necessary to round the numbers to the least decimal places. Given that 2.14 has two decimal places and 4.659 has three, round 4.659 to 4.66.
6) Now perform the subtraction 4.66 - 2.14 = 2.52
7) Then multiply by the power of 10: 2.52 × 10⁴ = 25,200. This is the final answer.
