1.Rolul generatorului electric într-un circuit electric este:

Answer:

K = 1.525 10⁻⁹ x⁴ + 4.1 10⁶ x

Explanation:

To calculate the kinetic energy variation, we can utilize the work-energy theorem.

W = ΔK

∫ F .dx = K - K₀

If the object starts from rest, then K₀ = 0.

So, ∫ F dx cos θ = K.

As the force and displacement directions align, the angle is zero, and hence the cosine is 1.

Now we can substitute and perform integration:

α ∫ x³ dx + β ∫ dx = K.

Thus, α x⁴ / 4 + β x = K.

Next, we evaluate from the limits F = 0 to F:

α (x⁴ / 4 - 0) + β (x - 0) = K.

Consequently, K = αX⁴ / 4 + β x.

This results in K = 1.525 10⁻⁹ x⁴ + 4.1 10⁶ x.

To finalize the computation, we need to ascertain the displacement.

We will utilize Wien's displacement law, given by the equation λ T = b, where λ represents the wavelength of emitted light from a heated object at maximum. By substituting the provided temperature and constant b into the equation, we find λ for various temperatures: at 500 K, λ = 5.796 μm or 5796 nm; at 1050 K, λ = 2760 nm; at 1800 K, λ = 1610 nm; and at 2500 K, λ = 1159.2 nm. The visible light spectrum starts at 740 nm, suggesting that at 2500 K, some visible red light may emerge as its calculated peak wavelength is within the visible range.

Answer:

a = 18.28 ft/s²

Explanation:

the values provided are:

duration of force application, t= 10 s

Work done = 10 Btu

mass of the object = 15 lb

acceleration, a =? ft/s²

1 Btu = 778.15 ft.lbf

thus, 10 Btu = 7781.5 ft.lbf

m = 0.466 slug

So,

the work is equivalent to the change in kinetic energy

 

The acceleration of the object is therefore

 

 

         a = 18.28 ft/s²

the constant acceleration of the object is calculated to be 18.28 ft/s²

Answer

Data provided:

mass of the block = 200 g = 0.2 Kg

Velocity at A = 0 m/s

Velocity at B = 8 m/s

distance of slide = 10 m

height of the block = 4 m

calculation for the block's potential energy

    P = m g h

    P = 0.2 x 9.8 x 4

    P = 7.84 J

kinetic energy calculated as

   

   

   

Work done = P - KE

work = 7.84 - 6.14

work = 1.7 J

b) using the formula v² = u² + 2 a s

   0 = 8² - 2 x a x 10

   a = 3.2 m/s²

ma - μ mg = 0

 

 

 

The sheet's thickness is calculated to be t= 0.0003 mm. The mass provided is m = 230 mg, equivalent to 0.23 g. The area of the sheet is A= 23 x 17 cm², totaling A= 391 cm². Given the density of gold is ρ = 19.32 g/cm³, we assume the sheet's thickness is t cm. From the equation Mass = Density x Volume, we know m = ρ A t. Substituting the values results in: 0.23 = 19.32 × 391 × t, leading to t = 0.000030 cm, or equivalently, 0.0003 mm as the final thickness.