answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
GalinKa
19 days ago
6

Twenty-five wooden beams were ordered or a construction project. The sample mean and he sample standard deviation were measured

xbar = 190cm, s = 5cm. Calculated confidence interval for the mean is [188.29; 191.71].
Which confidence level was chosen? Assume distribution to be normal.
A. 99%
B. 90%
C. 95%
D. 99.9%
Engineering
You might be interested in
___________ is NOT a common injury that an automotive tech may experience at work.
Viktor [391]

Answer: The most frequently occurring injuries were sprains/strains, accounting for 39% of the total; lacerations comprised 22%, and contusions represented 15%. Almost half (49%) of the injuries led to one or more days of lost or restricted work; 25% resulted in 7 or more days lost or restricted.

Explanation:

Sprains/strains were the predominant injuries happening, making up 39% of all cases, while lacerations followed at 22% and contusions at 15%. Of these injuries, 49% caused employees to miss or face restricted workdays, with 25% leading to a minimum of 7 days lost or restricted.

7 0
4 months ago
The components of an electronic system dissipating 90 W are located in a 1-m-long circular horizontal duct of 15-cm diameter. Th
iogann1982 [368]

Answer:

Provided information

 an electronic system dissipating = 90 W

diameter = 15 cm

The duct has components cooled by forced air entering at 32°C with a flow rate of 0.65 m3 /min

85% of the generated heat is transferred to the air in the duct, and 15% is lost through the duct's outer surfaces.

See the attached images for the solution.

Explanation:

Consult the attached pictures for a thorough breakdown of the explanation.

4 0
3 months ago
Other questions:
  • The 10-kg block slides down 2 m on the rough surface with kinetic friction coefficient μk = 0.2. What is the work done by the fr
    7·1 answer
  • 1 At a certain location, wind is blowing steadily at 10 m/s. Determine the mechanical energy of air per unit mass and the power
    11·1 answer
  • cubical tank 1 meter on each edge is filled with water at 20 degrees C. A cubical pure copper block 0.46 meters on each edge wit
    6·1 answer
  • Marble A is placed in a hollow tube, and the tube is swung in a horizontal plane causing the marble to be thrown out. As viewed
    11·1 answer
  • Consider film condensation on a vertical plate. Will the heat flux be higher at the top or at the bottom of the plate? Why?
    5·1 answer
  • A hydraulic cylinder is to be used to move a workpiece in a manufacturing operation through a distance of 50 mm in 10 s. A force
    9·1 answer
  • A distância entre duas retas reversas é a medida de um segmento orientado que *?
    6·1 answer
  • A 3-ft-diameter vertical cylindrical tank open to the atmosphere contains 1-ft-high water. The tank is now rotated about the cen
    7·1 answer
  • Open the"stateData3.c" program and try to understand how the tokenization works. If you open the input file "stateData.txt", you
    15·1 answer
  • In a production turning operation, the foreman has decreed that a single pass must be completed on the cylindrical workpiece in
    7·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!