All categories

27 days ago

If you pump air into cycle tyre a slight warming effect is noticed at valve stem why

1 answer:

8 0

The slight warm feeling noticed at the valve stem when air is pumped into the tire is likely due to the kinetic energy generated by the friction from the pump and the resultant increase in gas pressure within the tire.

You might be interested in

Compound X contains only carbon, hydrogen, nitrogen, and chlorine. When 1.00 g of X is dissolved in water and allowed to react w

eduard [2509]

Let's assume that the compound formula is as follows: Experiment 1: 1.00 g of the compound yields 1.95 g of AgCl. The molar mass of AgCl is 143.32 g/mol. Thus, the moles of AgCl for 1.95g are: The moles of Cl also equal 0.0136, considering that 1 mole of AgCl corresponds to 1 mole of Cl. Experiment 2: 1.00 g of the compound results in 0.900 g of CO2 and 0.735 g of H2O. The molar mass of CO2 is 44 g/mol, and for H2O, it's 18 g/mol. Therefore, the moles of C come to 0.0205 and the moles of H stand at 0.0816 (which is 2 times the moles of H2O). Now, from the provided details, it's derived that in 1.00 g of the compound, there are 0.0136 moles of Cl, 0.0205 moles of C, and 0.0816 moles of H. In terms of mass: Mass of Cl = 0.0136 * 35.5 = 0.4828 g. Mass of C = 0.0205 * 12 = 0.246 g. Mass of H = 0.0816 * 1 = 0.0816 g. Total mass = 0.4828 + 0.246 + 0.0816 + mass of N. Given that 1.00 = 0.8104 + Mass of N, it follows that Mass of N = 0.1896. Thus, upon dividing all moles by the smallest value, we find Cl = 0.0136 / 0.0135 = 1.0007; C = 0.0205 / 0.0135 = 1.52; H = 0.0816 / 0.0135 = 6.04; N = 0.0135 / 0.0135 = 1. Multiplying by 2 allows us to reach integer values: Cl = 2, C = 3, H = 12, N = 2.

7 0

17 days ago

During which time interval does the substance exist as both a liquid and a solid

lions [2653]

The Chemistry Regents is one of the four science Regents exams. The remaining three are Earth Science, Living Environment, and Physics. Passing at least one of these four exams is a requirement for high school graduation.

8 0

1 month ago

For the following equilibrium: A+2B⇋C+3D If the change in concentration for B is 0.44 M, what will be the change in concentratio

Anarel [2600]

0.22 M

5 0

20 days ago

You want to prepare a solution with a concentration of 200.0μM from a stock solution with a concentration of 500.0mM. At your di

lorasvet [2515]

Answer:

1) This dilution plan will yield a 200μM solution.

2) This dilution plan will not yield a 200μM solution.

3) This dilution plan will not yield a 200μM solution.

4) This dilution plan will yield a 200μM solution.

5) This dilution plan will yield a 200μM solution.

Explanation:

Convert the initial molarity into molar form as shown.

$500mM = 500mM \times (\frac{1M}{1000M})= 0.5M$

Let's examine the following serial dilution processes.

Dilute 5.00 mL of the stock solution to 500 mL. Then take 10.00 mL of this new solution and dilute it further to 250 mL.

Concentration of 500 mL solution:

$M_{2}= \frac{M_{1}V_{1}}{V_{2}}= \frac{(0.5M)(5.00mL)}{500 mL}= 5 \times 10^{-3}M$

10 mL of this solution is further diluted to 250 mL

$M_{final}= \frac{M_{2}V_{2}}{V_{final}}= \frac{(5 \times 10^{-3}M)(10.0mL)}{250 mL}= 2 \times 10^{-4}M$

Convert μM:

$2 \times 10^{-4}M = (2 \times 10^{-4}M)(\frac{1 \mu M}{10^{-6}M})= 200 \mu M$

Thus, this dilution scheme will yield a 200μM solution.

Dilute 5.00 mL of the stock solution to 100 mL. Then take 10.00 mL of this new solution and dilute to 1000 mL.

Concentration of 100 mL solution:

$M_{2}= \frac{M_{1}V_{1}}{V_{2}}= \frac{(0.5M)(5.00mL)}{100 mL}= 2.5 \times 10^{-2}M$

10 mL of this solution is further diluted to 1000 mL

$M_{final}= \frac{M_{2}V_{2}}{V_{final}}= \frac{(2.5 \times 10^{-2}M)(10.0mL)}{1000 mL}= 2.5 \times 10^{-4}M$

Convert μM:

$2.5 \times 10^{-4}M = (2.5 \times 10^{-4}M)(\frac{1 \mu M}{10^{-6}M})= 250 \mu M$

Thus, this dilution scheme will not yield a 200μM solution.

Dilute 10.00 mL of the stock solution to 100 mL, followed by diluting 5 mL of that new solution to 100 mL.

Concentration of 100 mL solution:

$M_{2}= \frac{M_{1}V_{1}}{V_{2}}= \frac{(0.5M)(10mL)}{100 mL}= 0.05M$

5 mL of this solution is diluted to 1000 mL

$M_{final}= \frac{M_{2}V_{2}}{V_{final}}= \frac{(0.05M)(5mL)}{1000 mL}= 0.25 \times 10^{-4}M$

Convert μM:

$0.25 \times 10^{-4}M = (0.25 \times 10^{-4}M)(\frac{1 \mu M}{10^{-6}M})= 25 \mu M$

Thus, this dilution scheme will not yield a 200μM solution.

Dilute 5 mL of the stock solution to 250 mL. Then take 10 mL of this new solution and further dilute it to 500 mL.

Concentration of 250 mL solution:

$M_{2}= \frac{M_{1}V_{1}}{V_{2}}= \frac{(0.5M)(5mL)}{250 mL}= 0.01M$

10 mL of this solution is further diluted to 500 mL

$M_{final}= \frac{M_{2}V_{2}}{V_{final}}= \frac{(0.01M)(10mL)}{500 mL}= 2 \times 10^{-4}M$

Convert μM:

$2 \times 10^{-4}M = (2 \times 10^{-4}M)(\frac{1 \mu M}{10^{-6}M})= 200 \mu M$

Thus, this dilution scheme will yield a 200μM solution.

Dilute 10 mL of the stock solution to 250 mL. Then take another 10 mL of this new solution and dilute it to 1000 mL.

Concentration of 250 mL solution:

$M_{2}= \frac{M_{1}V_{1}}{V_{2}}= \frac{(0.5M)(10mL)}{250 mL}= 0.02M$

10 mL of this solution is further diluted to 1000 mL

$M_{final}= \frac{M_{2}V_{2}}{V_{final}}= \frac{(0.02M)(10mL)}{1000 mL}= 2 \times 10^{-4}M$

Convert μM:

$2 \times 10^{-4}M = (2 \times 10^{-4}M)(\frac{1 \mu M}{10^{-6}M})= 200 \mu M$

Thus, this dilution scheme will yield a 200μM solution.

7 0

1 month ago

Give an example of a rule of the natural world that a scientist can assume is always true.

Alekssandra [2711]

Laws of Nature should be differentiated from Scientific and Natural Laws. The Necessitarian Theory suggests that Laws of Nature are those principles which influence the natural phenomena in the universe, meaning the natural world adheres to them.

4 0

19 days ago