If 60.0 ml of a 1.5 m hcl solution is put into a flask and diluted with water to make 2.0 l of solution

Response:

The cuvette was prepared with the solution so that the spectrometer measures solely the absorbance from the solute. This also means the spectrometer disregards other fluctuations in absorbance that typically arise from the composition of water. The spectrometer focused only on the absorbance of as reflected in the spectrum. The reaction between the and the produces two clear liquids that generate the orange product which leads to the absorbance spectrum. Due to the orange color of the solution, it reflects this hue and others like it, while absorbing blue tones. To isolate the absorption of just the , pre-rinsing the cuvette with the solutions intended for measurement is advisable, along with using a kimwipe to clean any fingerprints that might impact data collection.

Clarification:

The cuvette was prepared with the solution so that the spectrometer measures solely the absorbance from the solute. This also means the spectrometer disregards other fluctuations in absorbance that typically arise from the composition of water. The spectrometer focused only on the absorbance of as reflected in the spectrum.

Answer:

La masa molar del compuesto es: 168.82 g/mol

La masa molar del gas es: 16.38 g/mol

Explanation:

(a)

Utilizando la ecuación de gases ideales:

donde,

P es la presión

V es el volumen

n es el número de moles

T es la temperatura

R es la constante de los gases, cuyo valor es = 0.0821 L.atm/K.mol

Además,

Moles = masa (m) / Masa molar (M)

La densidad (d) = Masa (m) / Volumen (V)

Así, la ecuación de gases ideales se puede expresar como:

Dado que:-

Presión = 20 kPa = 20000 Pa

La expresión para la conversión de presión en Pascal a presión en atm se muestra a continuación:

P (Pa) = P (atm)

20000 Pa = atm

Presión = 0.1974 atm

Temperatura = 330 K

d = 1.23 kg/m³ = 1.23 g/L

Masa molar =?

Aplica la fórmula:

0.1974 atm × M = 1.23 g/L × 0.0821 L.atm/K.mol × 330 K

⇒M = 168.82 g/mol

La masa molar del compuesto es: 168.82 g/mol

(b)

Dado que:

Presión = 152 Torr

Temperatura = 298 K

Volumen = 250 cm³ = 0.25 L

Utilizando la ecuación de gases ideales:

R =

Aplicando la fórmula:

152 Torr × 0.25 L = n × 62.3637 L.torr/K.mol × 298 K

⇒n = 0.002045 moles

Dado que:

Masa del gas = 33.5 mg = 0.0335 g

Masa molar =?

La fórmula para calcular los moles se muestra a continuación:

Así,

La masa molar del gas es: 16.38 g/mol

A skeletal formula is usually used for organic compounds

The accompanying illustration depicts the structure of dimethyl terephthalate. Explanation: Dimethyl terephthalate, whose chemical formula is C6H4 (COOCH3) 2, is a diester derived from terephthalic acid and methanol. It appears as a white solid. Another method of syntheses involves p-xylene and methanol, characterized by an oxidation process followed by esterification.

C. The molecule N₂ does not undergo transitions in electronic energy levels due to visible light, whereas transitions occur in I₂ molecules due to visible light.

Explanation:

Molecule absorption of light results in electronic transitions from a ground level to an elevated level matching the energy of the absorbed light.

For nitrogen (N₂), permissible electronic transitions require energy differences corresponding to ultraviolet photon energy. Thus, nitrogen remains colorless as it does not absorb visible light. In contrast, iodine (I₂) facilitates electronic transitions corresponding to visible light photon energies, which gives iodine vapors their violet hue.

Learn more about:

electronic transitions